NEW
Spider Stands™ and interchangeable toppers for trumpet, piccolo trumpet and flugelhorn, including the LED-lit Broadway models for dark stages and pits.
As Hirschman Mutes did with our plungers, buzz mute, and PEP (pixie) mute, we started by looking at a product category in need of improvement and asking: “How can we make the best-ever product for today’s trumpet players?” We’ve tried just about every trumpet stand on the market. Three-legged stands tip over. Metal stands are heavy and take up valuable space on stage and in your case. Some stands that store inside the bell are extremely heavy. Ultralight stands leave you wondering whether your horn is about to hit the floor. Our starting point was a discontinued six-legged stand and the result is the new Hirschman Mutes Spider Stand™—one that keeps everything musicians loved (compactness, lightweight, stability) while solving issues players have tolerated for years.
The Hirschman Mutes Spider Stand™ for Trumpet includes the stand with an adjustable-height Trumpet Topper.
Every component was redesigned for greater strength, stability, and durability, and the feet are larger and grippier.
Dial in the proper fit for E♭ through B♭ trumpets, flugelhorns, and rotary-valve trumpets.
Soft rubber topper and leg inserts won’t damage your horn like plastic-feeling contact surfaces, and the longer, taller leg inserts accommodate a vastly wider range of bell diameters.
A hex-shaped center post that is easier to grip and turn, conventional “righty-tighty, lefty-loosey” operation (the reverse of the original design), and a bottom coin/key slot that makes the stand easy to open if overtightened.
Toppers for Flugelhorn and Piccolo Trumpet are available (sold separately). Playing on dark stages? See the LED-lit Broadway Spider Stand™.
The Hirschman Mutes Broadway Spider Stand™ for Trumpet includes the stand with the adjustable-height, LED-lit Broadway Trumpet Topper, designed for performance on dark stages or in orchestra pits, such as those in Broadway shows, theater productions, and touring productions.
During a stage blackout, a trumpet player may need to put the instrument down quickly but have difficulty seeing the stand. The Broadway Trumpet Topper addresses this problem with a faint blue LED built into the very top of the stand.
A faint blue LED built into the very top helps you locate the stand during a stage blackout without distracting the audience, conductor or other players. It sits flush with the top, so your bell rests on soft rubber and never touches the LED.
The on/off switch is reached through a small opening on the side with a finger or the eraser end of a pencil. The electronics and battery are permanently sealed inside (not user serviceable) and provide hundreds and hundreds of hours of illumination; when the battery is eventually depleted, the topper remains perfectly usable as a standard trumpet topper.
Every component was redesigned for greater strength, stability, and durability, and the feet are larger and grippier.
Soft rubber topper and leg inserts won’t damage your horn like plastic-feeling contact surfaces, and the longer, taller leg inserts accommodate a vastly wider range of bell diameters.
A hex-shaped center post that is easier to grip and turn, conventional “righty-tighty, lefty-loosey” operation (the reverse of the original design), and a bottom coin/key slot that makes the stand easy to open if overtightened.
Dial in the proper fit for E♭ through B♭ trumpets and rotary-valve trumpets. Interchangeable toppers for Flugelhorn and Piccolo Trumpet are available (sold separately).
As Hirschman Mutes did with our plungers, buzz mute, and PEP (pixie) mute, we started by looking at a product category in need of improvement and asking: “How can we make the best-ever product for today’s piccolo trumpet players?” We’ve tried just about every trumpet stand on the market. Three-legged stands tip over. Metal stands are heavy and take up valuable space on stage and in your case. Some stands that store inside the bell are extremely heavy. Ultralight stands leave you wondering whether your horn is about to hit the floor. Our starting point was a discontinued six-legged stand and the result is the new Hirschman Mutes Spider Stand™—one that keeps everything musicians loved (compactness, lightweight, stability) while solving issues players have tolerated for years.
The Hirschman Mutes Spider Stand™ for Piccolo Trumpet includes the stand and Piccolo Trumpet Topper.
Fits piccolo trumpet out of the box, without modifying or mangling the stand.
Unlike our other Spider Stands™, the piccolo trumpet topper isn’t height adjustable. It fits most piccolo trumpets and is also a great choice for trumpet in F or G.
Tested extensively by world-renowned trumpet player Jens Lindemann. He typically carries the piccolo stand as his ONLY stand while touring, placing piccolo, B♭ trumpet or flugelhorn on it, depending on the piece.
Every component was redesigned for greater strength, stability, and durability, and the feet are larger and grippier.
Soft rubber topper and leg inserts won’t damage your horn like plastic-feeling contact surfaces, and the longer, taller leg inserts accommodate a vastly wider range of bell diameters.
A hex-shaped center post that is easier to grip and turn, conventional “righty-tighty, lefty-loosey” operation (the reverse of the original design), and a bottom coin/key slot that makes the stand easy to open if overtightened.
Interchangeable toppers for Flugelhorn and Trumpet (sold separately).
As Hirschman Mutes did with our plungers, buzz mute, and PEP (pixie) mute, we started by looking at a product category in need of improvement and asking: “How can we make the best-ever product for today’s flugelhorn players?” We’ve tried just about every flugelhorn stand on the market. Three-legged stands tip over. Metal stands are heavy and take up valuable space on stage and in your case. Some stands that store inside the bell are extremely heavy. Ultralight stands leave you wondering whether your horn is about to hit the floor. Our starting point was a discontinued six-legged stand and the result is the new Hirschman Mutes Spider Stand™—one that keeps everything musicians loved (compactness, lightweight, stability) while solving issues players have tolerated for years.
The Hirschman Mutes Spider Stand™ for Flugelhorn includes the stand with an adjustable-height Flugelhorn Topper.
Every component was redesigned for greater strength, stability, and durability, and the feet are larger and grippier.
Height adjustability lets you dial in the proper fit for your flugelhorn.
Soft rubber topper and leg inserts won’t damage your horn like plastic-feeling contact surfaces, and the longer, taller leg inserts accommodate a vastly wider range of bell diameters.
A hex-shaped center post that is easier to grip and turn, conventional “righty-tighty, lefty-loosey” operation (the reverse of the original design), and a bottom coin/key slot that makes the stand easy to open if overtightened.
Interchangeable toppers for Trumpet and Piccolo Trumpet (sold separately).
A swappable topper that converts a Hirschman Mutes Spider Stand™ for Flugelhorn or Piccolo Trumpet (sold separately) into a Trumpet stand.
Converts a flugelhorn or piccolo trumpet Spider Stand™ into a trumpet stand.
Soft rubber topper won’t damage or dent your bell like brands with hard tops.
Metal threaded rod with Trumpet Topper, thumb nut and rubber washer. Stand not included.
The Hirschman Mutes Broadway Trumpet Topper is designed for trumpet players who perform on dark stages or in orchestra pits, such as those in Broadway shows, theater productions, and touring productions.
During a stage blackout, a trumpet player may need to put the instrument down quickly but have difficulty seeing the stand. The Broadway Trumpet Topper addresses this problem with a faint blue LED built into the top. The light helps the musician locate the stand in dark conditions while remaining inconspicuous to the audience and other players.
A faint blue LED built into the very top helps you locate the stand during a stage blackout without distracting the audience, conductor or other players. It sits flush with the top, so your bell rests on soft rubber and never touches the LED.
Similar in size to the standard Hirschman Mutes trumpet topper, the Broadway version retains the same soft rubber exterior, instrument support, and height adjustability.
The on/off switch is reached through a small opening on the side with a finger or the eraser end of a pencil. The electronics and battery are permanently sealed inside (not user serviceable) and provide hundreds and hundreds of hours of illumination; when the battery is eventually depleted, the topper remains perfectly usable as a standard trumpet topper.
Fits the Hirschman Mutes Spider Stand™. Stand sold separately.
A swappable topper that converts a Hirschman Mutes Spider Stand™ for Trumpet or Piccolo Trumpet (sold separately) into a Flugelhorn stand.
Converts a trumpet or piccolo trumpet Spider Stand™ into a flugelhorn stand.
Soft rubber topper won’t damage or dent your bell like brands with hard tops.
Metal threaded rod with Flugelhorn Topper, thumb nut and rubber washer. Stand not included.
A swappable topper that converts a Hirschman Mutes Spider Stand™ for Trumpet or Flugelhorn (sold separately) into a Piccolo Trumpet stand.
Converts a trumpet or flugelhorn Spider Stand™ into a piccolo trumpet stand.
Unlike our other Spider Stands™, the piccolo trumpet topper isn’t height adjustable. It fits most piccolo trumpets and is also a great choice for trumpet in F or G. Larger trumpets like B♭ or C may be placed on top of the stand when configured for piccolo trumpet as well.
Threaded Piccolo Trumpet topper. Stand not included.